Anyone Can Take Classes at TechShop -- You Do NOT Need to Be a TechShop Member to Take Classes!

TechShop Austin-Round Rock Class Listings


View Class Listings at Our Other Locations Here >> Change TechShop Location

View the TechShop Austin-Round Rock Interactive Class Calendar Here >> MONTH-AT-A-GLANCE


Category:

 ARTS AND CRAFTS (ART)
 
   
ART103: Silk Screen Printing Basics - SBU

In this hands-on class, learn the basics of silkscreen printing. TechShop makes it easy by using vinyl stencils rather than photo-emulsion. Prepare a vinyl stencil, transfer onto a screen, apply ink to fabric through screen, and then heat set the ink. It’s that simple.

Want to print a t-shirt using your own artwork? Bring a simple black and white drawing that will be cut by hand. Participants who have passed the Vinyl Cutter Safety and Basic Use (SBU) class may bring in a pre-cut design to use. Otherwise, choose from several designs provided. Get ready to start making custom silkscreened t-shirts!

Project: Custom t-shirt or tote bag

Prerequisites: None

Equipment access: Silkscreen station

Minimum age: 12

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the silkscreen station outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety: Closed-toed shoes are required.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Silk Screen Printing Basics - SBU Wednesday, 9/10/14 5:30 PM 3.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $90.00 plus $10.00 Materials Fee
    Non-member Sign Up $115.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 AUTODESK (AUD)
 
   
AUD006: Autodesk Inventor - Basics

Learn how to navigate, sketch and model in Autodesk Inventor.

In this class, you will gain a basic understanding of parametric design; file types; dimensioning; geometric constraints; patterns; adding text; inserting image files; basic modeling including Extrude, Revolve, Loft and Sweep; assemblies; exporting your file and creating laser-able and CAMable files. The goal is to provide you with enough tools to use Inventor at a solid, basic level and to inspire you to seek out more advanced features such as simulation, mold making and sheet metal.

We will use the book, “Mastering Autodesk Inventor 2013,” to explain and teach concepts. For this reason, we strongly recommend that you purchase the book and bring it to class. For your convenience, it is available in the TechShop retail store.

TechShop members who take this class will receive $35 in store credit after the completion of the class.

3 sessions currently scheduled:
    Autodesk Inventor - Basics Sunday, 9/7/14 10:00 AM 3.0 Hours 10 SEATS TOTAL
9 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    Autodesk Inventor - Basics Monday, 9/15/14 6:30 PM 3.0 Hours 10 SEATS TOTAL
10 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    Autodesk Inventor - Basics Sunday, 9/21/14 10:00 AM 3.0 Hours 10 SEATS TOTAL
10 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
AUD002: Autodesk Inventor SkillsBuilder - Introduction to Sketching

This Skills Builder class will provide you with an accelerated and intense introduction to Sketching in Autodesk Inventor.

Autodesk Inventor is a comprehensive and flexible software suite created exclusively for 3D design, product simulation, tooling creation and design communication. Inventor takes you beyond the average 3D software environment into Digital Prototyping by enabling you to design, visualize and simulate your products with an intuitive and user friendly interface.
  • Design—Integrate all design data into a single digital model
  • Visualize—Create a virtual representation of your final product to market it before it’s built
  • Simulate—Digitally simulate your product's real-world performance


We recommend taking this class along with the Autodesk Inventor SkillsBuilder - Introduction to Assemblies class to get a fuller understanding of this powerful 3D design tool!

Autodesk Inventor is available at TechShop on all computer workstations in our Members HUB and Computer Lab.

Prerequisite: You MUST take the Autodesk Inventor Basics class before taking this class.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Autodesk Inventor SkillsBuilder - Introduction to Sketching Sunday, 9/21/14 2:00 PM 3.0 Hours 10 SEATS TOTAL
10 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
AUD005 : Autodesk Inventor for Sheet Metal

In this project class, you will learn how to create and assemble sheet metal parts in Autodesk Inventor.

You will be guided through the process of building sheet metal housing features, creating patterns and using iFeatures. You will learn how to use equations to drive dimensions, how to generate two-dimensional drawings of your sheet metal parts, and how to export your geometry to a CAM program, enabling you to generate a file that can be used on a CNC machine.

Prerequisite: You MUST take the Autodesk Inventor Basics class before taking this class.

1 session currently scheduled:
    Autodesk Inventor for Sheet Metal Sunday, 9/7/14 2:00 PM 3.0 Hours 10 SEATS TOTAL
10 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
AUD008: Autodesk AutoCAD - Basics

Autodesk AutoCAD has a long history as one being of the very first CAD (computer aided drafting) programs available for personal computers. Today, AutoCAD software builds on this legacy and is still one of the world's leading 2D and 3D CAD design tools.

In this course, you will learn how to draw precise, vector-based CAD drawings that can be interpreted and used by CAM (computer aided machining) programs. The vector drawing skills taught in this class are the basis for creating designs to be used with TechShop's Epilog laser cutters, CNC vinyl cutter, Tormach CNC mill, ShopBot router, Flow waterjet cutter, and CNC plasma cutter. The 2D drawing skills taught in this course also translate to designing, drawing and manipulating 3D parts in other Autodesk software such as Autodesk Inventor and Revit.

Learn:
  • How to set up your workspace for efficiency
  • How to draw with arcs, polylines, splines and more
  • How to use text and reference images in your designs
  • How layers work
  • The theory behind drawing clean vectors
  • Optimization tips and tricks

  • 2 sessions currently scheduled:
        Autodesk AutoCAD - Basics Wednesday, 9/17/14 7:00 PM 3.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $35.00, No Materials Fee
        Non-member Sign Up $45.00, No Materials Fee
        Autodesk AutoCAD - Basics Monday, 9/29/14 7:00 PM 3.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $35.00, No Materials Fee
        Non-member Sign Up $45.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    AUD009: Autodesk Inventor for Mold Design

    Injection mold design and manufacturing can be one of the most expensive and time consuming processes in manufacturing and prototyping. But it doesn't have to be.

    Autodesk Inventor has a number of incredible software tools that make designing complex parts much easier. The feature-rich mold design section covered in this class is one of them.

    In this class, the instructor will cover several tools that are available to automate key aspects of injection mold design and testing.

    - Learn how parts modeled in Inventor can be used to automatically generate an efficient mold.

    - Learn how Inventor ensure that any changes to the digital model are automatically reflected in your mold design.

    When you are done with your design, the file can be exported to a variety of different CAM (computer aided manufacturing) packages to generate the code needed to machine your mold on equipment such as TechShop's CNC Tormach mill. Once you've machined your mold it can be used to manufacture parts on TechShop's Morgan Press injection molding machine.

    This class is a fantastic way to do in-house rapid prototyping and can help you cut down on the number of iterations needed before you have a working final mold ready for production on any scale.

    Prerequisite: You MUST take the Autodesk Inventor Basics class before taking this class.

    1 session currently scheduled:
        Autodesk Inventor for Mold Design Saturday, 9/13/14 6:30 PM 3.0 Hours 10 SEATS TOTAL
    9 SEATS LEFT
        * Member Sign Up $35.00, No Materials Fee
        Non-member Sign Up $45.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    AUD120: Autodesk Revit - 3D Modeling for Furniture

    Revit is Autodesk's 3D modeling software for architecture.

    In this basic class, you will learn how to use Revit on a furniture scale level to create small items. You will create an item with Revit’s sketch and modeling methods, manipulate its components as a family and project, and learn how to make the parts CAM ready for production. You will also see the benefits of using Revit to visualize your final design inside of its proposed location.

    Tools Required:
  • A computer with Autodesk Revit Architecture 2012 installed, provided by TechShop

    Materials Required:
  • Pen and note paper
  • Highlighter
  • A copy of Autodesk Revit Architecture 2012: No Experience Required (strongly recommended)

  • 2 sessions currently scheduled:
        Autodesk Revit - 3D Modeling for Furniture Tuesday, 8/26/14 6:30 PM 3.0 Hours 8 SEATS TOTAL
    7 SEATS LEFT
        * Member Sign Up $35.00, No Materials Fee
        Non-member Sign Up $45.00, No Materials Fee
        Autodesk Revit - 3D Modeling for Furniture Wednesday, 9/3/14 6:30 PM 3.0 Hours 8 SEATS TOTAL
    8 SEATS LEFT
        * Member Sign Up $35.00, No Materials Fee
        Non-member Sign Up $45.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     CNC (CNC)
     
       
    CNC101: Concepts of CNC

    Learn the basics of CNC (computer numerical control) devices. This seminar will present the whole CNC process, from CAD (computer aided design) to CAM (computer aided machining) to CUT (cutting your part). Learn the essentials of calculating feeds and speeds. Understand the uses and differences between climb cutting and conventional cutting.

    TechShop CNC Machining Series Overview

    Learn the big picture

    Concepts of CNC. Learn all the vocabulary and concepts needed to get the most out of the other classes in this series

    Learn to translate your drawing into machine readable code

    CAD to CAM - VCarve Pro and Cut3D. This class focuses on converting your CAD drawings into files for the ShopBot CNC router

    CAD to CAM - InventorCAM Software. This class focuses on converting your CAD drawings into files for the Tormach CNC mill, but the software will also work on the ShopBot

    Learn how to use the CNC machine - hands-on classes

    CNC ShopBot CNC Router SBU

    CNC Tormach CNC Mill SBU

    Waterjet cutter

    2 sessions currently scheduled:
        Concepts of CNC Friday, 9/5/14 7:00 PM 2.0 Hours 25 SEATS TOTAL
    25 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        Concepts of CNC Thursday, 9/25/14 6:00 PM 2.0 Hours 25 SEATS TOTAL
    25 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    CNC201: CAD/CAM Software - VCarve Pro and Cut3D

    In this information packed, hands-on, computer class you will learn the ins and outs of working with both VCarve Pro and Cut3D software packages.

    VCarve Pro is an easy-to-use CNC toolpath engine that generates precision toolpaths for virtually all CNC machines. You'll learn how to convert CAD DXF files and graphic designs into GCode-based CNC toolpaths for machining high quality parts and components.

    Cut3D is a dedicated toolpath engine for CNC machining 3D models that have been designed using a 3D CAD software such as Autodesk Inventor and other graphic design products. Cut3D's simple interface leads you step by step through the process of loading a model, setting the size, workholding, and calculating single, double- or four-sided roughing and finishing toolpaths. It will even allow you to virtually preview the results of your toolpath and then finally save the CNC code to run on your choice of machines.

    Upon successful completion of this class you will have the experience and knowledge necessary to enroll in any Level 3 CNC Machining Series class.

    4 sessions currently scheduled:
        CAD/CAM Software - VCarve Pro and Cut3D Saturday, 8/30/14 2:30 PM 3.0 Hours 10 SEATS TOTAL
    7 SEATS LEFT
        * Member Sign Up $90.00, No Materials Fee
        Non-member Sign Up $115.00, No Materials Fee
        CAD/CAM Software - VCarve Pro and Cut3D Monday, 9/8/14 6:00 PM 3.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $90.00, No Materials Fee
        Non-member Sign Up $115.00, No Materials Fee
        CAD/CAM Software - VCarve Pro and Cut3D Friday, 9/19/14 6:30 PM 3.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $90.00, No Materials Fee
        Non-member Sign Up $115.00, No Materials Fee
        CAD/CAM Software - VCarve Pro and Cut3D Saturday, 9/27/14 2:00 PM 3.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $90.00, No Materials Fee
        Non-member Sign Up $115.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    CNC302: CNC ShopBot SBU

    In this Safety and Basic Use (SBU) class, learn to use the computer-controlled (CNC) ShopBot router to cut objects, parts or art designed in 2D or 3D CAD. This powerful tool is perfect for rapid prototyping and digital fabrication. Create parts with complex curves and surfaces from most woods, plastics, foams, and other composites (no metal on this machine). This class teaches the use of the machine, but does not cover CAD drawing or toolpathing. VCarve Pro (CNC 201) is a good starting point for people new to CAD and CAM.

    Materials fee: Includes materials for the class project and a router bit for each student to keep.

    Project: Wooden gear

    Prerequisites

    • Recommended: Use of CAD and CAM software like VCarve Pro - CNC 201, Basic Woodshop SBU - WOD101


    Equipment access: CNC ShopBot Router

    Minimum age: 16

    Supervision requirements: During class, 16- and 17-year-old -year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the CNC ShopBot outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

    • Mandatory: Closed-toed shoes, eye protection, short sleeves

    • Advisable: Hearing protection, particle filter or dust mask


    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    8 sessions currently scheduled:
        CNC ShopBot SBU Wednesday, 8/27/14 6:30 PM 3.0 Hours 5 SEATS TOTAL
    CLASS FULL
        CNC ShopBot SBU Saturday, 8/30/14 7:00 PM 3.0 Hours 5 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Friday, 9/5/14 6:30 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Tuesday, 9/9/14 6:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Wednesday, 9/17/14 2:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Saturday, 9/20/14 3:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Tuesday, 9/23/14 5:30 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Monday, 9/29/14 6:30 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    CNC301: CNC Tormach Milling Machine SBU

    In this class, learn to use the CNC (computer-controlled) mill. This machine is the perfect combination of precision and power for any prototyping or hobby milling needs. Learn to convert G-code (created in InventorCAM, Cut 3D or VCarve Pro) into actual parts made from aluminum, steel, and even titanium.

    Materials fee:
    Includes materials for the class project and a router bit for each student to keep.

    Project: Bottle opener

    Prerequisites
    • Recommended: CAD experience, ability to create G-code, experience with conventional milling


    Equipment access: CNC milling machine

    Minimum age: 16

    Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the CNC mill outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

    • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove all jewelry.

    • Advisable: Hearing protection


    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    6 sessions currently scheduled:
        CNC Tormach Milling Machine SBU Sunday, 8/24/14 11:00 AM 3.0 Hours 5 SEATS TOTAL
    CLASS FULL
        CNC Tormach Milling Machine SBU Friday, 8/29/14 6:30 PM 3.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $115.00 plus $25.00 Materials Fee
        CNC Tormach Milling Machine SBU Monday, 9/8/14 6:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $115.00 plus $25.00 Materials Fee
        CNC Tormach Milling Machine SBU Sunday, 9/14/14 10:00 AM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $115.00 plus $25.00 Materials Fee
        CNC Tormach Milling Machine SBU Tuesday, 9/23/14 5:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $115.00 plus $25.00 Materials Fee
        CNC Tormach Milling Machine SBU Saturday, 9/27/14 11:00 AM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $115.00 plus $25.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    CNC310: CAD/CAM Software - InventorCAM

    InventorCAM is the next level CAM program offered by TechShop, supporting multiple-axis machining, both 2.5D and 3D feature cut path generation, and high levels of control over the cutting paths generated. It has the powerful benefit of being directly embedded into Autodesk Inventor so users can easily switch back to creating or adjusting their part and the toolpaths automatically reflecting the changes.

    InventorCAM's highly intuitive user interface allows toolpath generation to be as simple or as complex as users want it to be, with equal level of control over the geometry and makeup of cutting tools. It is the optimum tool for the intermediate to advanced TechShop CNC machinist.

    In this class, students will follow the instructor step by step in creating toolpaths for half of a feature-rich part, then solidify their knowledge by creating the toolpaths for the other half with instructor guidance.

    Prerequisites: This CAM works with Inventor to create GCode; you must be able to use Autodesk Inventor before signing up for this class.

    In order to get the most out of this class, we recommend that students be familiar with TechShop's first-level CAM programs from Vectric: VCarve and Cut3D as well as have experience using the Tormach or the ShopBot. Introductory topics such as feeds and speeds, zeroing machines appropriately according to defined zeros in the CAM program, workholding, and loading exported toolpaths into the machines will not be reviewed.

    1 session currently scheduled:
        CAD/CAM Software - InventorCAM Monday, 9/22/14 6:30 PM 3.0 Hours 8 SEATS TOTAL
    8 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    CNC401: CNC Waterjet Cutter SBU

    In this Safety and Basic Use (SBU) class, learn to safely operate the waterjet cutter, one of the most powerful tools at TechShop.

    Precisely cut almost any flat material with a very thin, high pressure stream of water and abrasive garnet. Work with everything from the thinnest sheet metal to 8 inches of granite, as well as wood, glass, tile, marble, and more. This extremely versatile, easy-to-program, and low-waste machine works without the risk of heat damage. The large bed accommodates full sheets of material.

    Class time is split between learning the FlowPath software and using the waterjet.

    Note: When using the FlowJet, a consumables fee will be charged, only for cutting time, not setup time. The waterjet cuts quickly and cost estimate strategies will be covered.

    Project: Gear-shaped bottle opener

    Prerequisites

    • Required: Understanding of vector-based graphics

    • Recommended: CAD to CAM experience


    Equipment access: Waterjet cutter

    Minimum age: 16

    Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the waterjet outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

    • Mandatory: Closed-toed shoes, eye protection

    • Advisable: Hearing protection


    The waterjet cutter in TechShop Austin-Round Rock has a 10' by 6' cutting surface.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    6 sessions currently scheduled:
        CNC Waterjet Cutter SBU Thursday, 8/21/14 5:00 PM 4.0 Hours 4 SEATS TOTAL
    1 SEAT LEFT
        * Member Sign Up $185.00 plus $10.00 Materials Fee
        Non-member Sign Up $230.00 plus $10.00 Materials Fee
        CNC Waterjet Cutter SBU Friday, 8/29/14 6:00 PM 4.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $185.00 plus $10.00 Materials Fee
        Non-member Sign Up $230.00 plus $10.00 Materials Fee
        CNC Waterjet Cutter SBU Monday, 9/8/14 2:30 PM 4.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $185.00 plus $10.00 Materials Fee
        Non-member Sign Up $230.00 plus $10.00 Materials Fee
        CNC Waterjet Cutter SBU Saturday, 9/13/14 5:30 PM 4.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $185.00 plus $10.00 Materials Fee
        Non-member Sign Up $230.00 plus $10.00 Materials Fee
        CNC Waterjet Cutter SBU Tuesday, 9/16/14 5:00 PM 4.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $185.00 plus $10.00 Materials Fee
        Non-member Sign Up $230.00 plus $10.00 Materials Fee
        CNC Waterjet Cutter SBU Friday, 9/26/14 6:30 PM 4.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $185.00 plus $10.00 Materials Fee
        Non-member Sign Up $230.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     COMPUTERS (COM)
     
       
    COM201: Adobe Illustrator for CNC

    Makers and designers alike agree that vector drawing is the starting point of all CNC fabrication.

    Adobe Illustrator is an extremely powerful 2D vector graphics drawing program -- almost any product or invention that you imagine can begin in Illustrator. By following the pathways offered in this class, you will be able to export your files to any of the CNC machines in the TechShop arsenal.

    In this class, you will learn the basics of the interface and navigation, effective drawing techniques, converting bitmaps to vectors in one step, creating clean and optimized vectors, and the most efficient techniques to prepare your files for CNC operations. You will also learn how each of the CNC machines at TechShop will work with your file to create your projects.

    This class provides the foundation of skills for the following classes: CNC Concepts, CAD / CAM, ShopBot SBU, Tormach SBU, CNC Vinyl Cutter SBU, Laser Cutter SBU, and WaterJet SBU.

    Prerequisite: A working knowledge of Windows operating environment!

    1 session currently scheduled:
        Adobe Illustrator for CNC Saturday, 8/23/14 10:00 AM 3.0 Hours 10 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $50.00, No Materials Fee
        Non-member Sign Up $65.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    COM207: CorelDRAW for CNC

    Makers and designers alike agree that vector drawing is the starting point of all CNC fabrication. CorelDRAW is an extremely powerful 2D vector graphics drawing program similar to Adobe Illustrator. Almost any product or invention that you imagine can begin in CorelDRAW. By following the pathways offered in this class, you can export your files to any of the CNC machines in the TechShop arsenal.

    In this class, you will learn the basics of the interface and navigation, effective drawing techniques, how to convert bitmaps to vectors in one step, creating clean and optimized vectors, and the most efficient techniques to prepare your files for CNC operations. You will also learn how each of the CNC machines at TechShop will work with your file to create your projects.

    This class provides the foundation of skills for the following classes: CNC concepts, CAD / CAM, ShopBot Safety and Basic Use (SBU), Tormach SBU, CNC Vinyl Cutter SBU, Laser Cutter SBU and Waterjet SBU.

    2 sessions currently scheduled:
        CorelDRAW for CNC Wednesday, 8/27/14 7:00 PM 2.5 Hours 10 SEATS TOTAL
    9 SEATS LEFT
        * Member Sign Up $50.00, No Materials Fee
        Non-member Sign Up $65.00, No Materials Fee
        CorelDRAW for CNC Friday, 9/12/14 6:30 PM 2.5 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $50.00, No Materials Fee
        Non-member Sign Up $65.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     ELECTRONICS (EEE)
     
       
    EEE100: Soldering and Basic Electronics

    Learn how to use solder and a soldering iron to make small stick figures, as well as how to solder electronic "through-hole" components for electronic printed circuit board assembly (PCBs).

    In this class, you will learn basic solder and flux types, safe soldering practices, and soldering iron maintenance. You will learn to de-solder using various techniques, including a "solder sucker" tool or solder braid. In addition, you will build an LED Blinkatron 2000 - it's a simple soldering project that works!

    All parts are included. Add the potentiometer to change the blink speed.

    This is a fun first class for kids and adults!

    3 sessions currently scheduled:
        Soldering and Basic Electronics Friday, 8/22/14 7:00 PM 2.0 Hours 6 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Soldering and Basic Electronics Saturday, 9/6/14 2:30 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Soldering and Basic Electronics Friday, 9/26/14 7:00 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    EEE103: Arduino Part 1 - Building An Arduino - Educato

    The Arduino is a microcontroller; a small computer that has a single function. Microcontrollers run everyday items like toaster ovens, electronic toys and MP3 players. An Arduino can be programmed to monitor sensors and watch for inputs like temperature, pressure, light, voltage or a button or switch. It can also be programmed to control switches, relays, motors and other outputs. There are many add on boards, called shields, that add features like WiFi, GPS and card readers.

    Electronic "smarts" can be added to projects to make them interactive. For example, a pet door could be modified to lock if it's dark outside and the temperature is below 45 degrees.

    This class is the first step in using the Arduino: soldering the parts onto the circuit board. Come to class with some basic soldering experience and get help and guidance while assembling the board.

    Materials fee: includes an Arduino Educato that you keep for your own projects.

    1 session currently scheduled:
        Arduino Part 1 - Building An Arduino - Educato Tuesday, 9/9/14 6:00 PM 3.0 Hours 6 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $75.00 plus $30.00 Materials Fee
        Non-member Sign Up $95.00 plus $30.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    EEE310: Arduino Part 3 - Programming

    Do you want to bring interactivity and intelligence to your TechShop projects? Programming basics for Arduino builds on the lessons learned in Arduino 1 and 2 with an in-depth look at how to write your own Arduino programs.

    In this class, we will cover the structure of an Arduino program, functions, variables, arrays, control structures, using Libraries and Arduino-specific functions.

    Students with no programming experience will appreciate learning basic concepts and structures for programming for the Arduino. Students with programming experience will appreciate learning the ins and outs of adapting their coding for use with the Arduino.

    Prerequisites: You need a working Arduino board, and the basic concepts of programming.

    2 sessions currently scheduled:
        Arduino Part 3 - Programming Saturday, 8/23/14 1:30 PM 3.0 Hours 10 SEATS TOTAL
    7 SEATS LEFT
        * Member Sign Up $90.00, No Materials Fee
        Non-member Sign Up $115.00, No Materials Fee
        Arduino Part 3 - Programming Saturday, 9/20/14 1:30 PM 3.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $90.00, No Materials Fee
        Non-member Sign Up $115.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     FABRICATION (FAB)
     
       
    FAB105: Vacuum Forming SBU

    Lots of parts can be made quickly and inexpensively with the use of a vacuum forming system.

    In this Safety and Basic Use class, you will learn the parts of the vacuum forming machine and then make vacuum-formed parts. You will make a master (plug) tool from inexpensive materials like pine, foam, balsa or found objects; select plastic sheeting; and then use the created part as a "plug" to mold the final object from a heated plastic sheet with the assistance of atmospheric pressure.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    3 sessions currently scheduled:
        Vacuum Forming SBU Saturday, 9/6/14 12:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Vacuum Forming SBU Wednesday, 9/10/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Vacuum Forming SBU Saturday, 9/27/14 5:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    FAB106: Sand Blasting and Powder Coating SBU

    Powder coating is a durable, simple to apply, easy to clean up, product. It is inexpensive, and more environmentally friendly than paint, as it has no VOCs and no solvents are used. The final product is more durable than paint, and powder is available in many colors and finish types.

    The sand blaster can be used on metal, wood, glass, mirror, plastics and almost any material that is rigid. It will remove paint, rust and mill scale, as well as cleaning welds. (The parts must be baked at about 400 degrees for 15 minutes, so it will not work on magnetic items, or anything with grease in the part, like bearings.)

    In this Safety and Basic Use class, you will learn how to use a cabinet sandblaster to prepare a small metal part, clean and coat it with powder, and then bake it on in the powder coat oven. There is only time in class for sandblasting steel and aluminum parts.

    Note: The sandblast cabinet and powder coating oven are large enough for motorcycle frames, bicycles and many other bulky items. Please visit your local TechShop and check the oven size if you have a specific project in mind.

    Because of possible shock (high voltage, low amperage) with a powder coating gun, members with a pacemaker, or any voltage sensitive medical equipment are not allowed to take this course or use the equipment.

    Once you have taken and successfully passed this class, you will be cleared to use the sandblasting cabinet, powder coating gun, powder spray booth, and powder coating oven.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    7 sessions currently scheduled:
        Sand Blasting and Powder Coating SBU Saturday, 8/23/14 3:30 PM 2.0 Hours 4 SEATS TOTAL
    CLASS FULL
        Sand Blasting and Powder Coating SBU Thursday, 8/28/14 4:00 PM 2.0 Hours 4 SEATS TOTAL
    CLASS FULL
        Sand Blasting and Powder Coating SBU Thursday, 9/4/14 4:00 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Sand Blasting and Powder Coating SBU Sunday, 9/7/14 5:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Sand Blasting and Powder Coating SBU Friday, 9/12/14 2:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Sand Blasting and Powder Coating SBU Thursday, 9/18/14 3:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Sand Blasting and Powder Coating SBU Saturday, 9/27/14 3:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    FAB107: Silicone RTV Moldmaking and Casting Basics

    Learn how to work with silicone RTV (room temperature vulcanization), make a small mold using a plastic cup, see how more advanced molds are made, and even cast your own part in urethane resin!

    In this introductory class, you will learn to make a silicone RTV mold from a small part or pre-made plug. You will makea single-sided mold of a quarter or other small, simple part. You will also examine two-sided mold making, adding registration "buttons" and slicing the mold. You will then cast resin in an RTV mold, learning tips and tricks to mixing and pouring resin and other substances to create final pieces from a silicone RTV mold.

    Designed for the beginner, this class shows how easy it is to build molds with silicone RTV.

    3 sessions currently scheduled:
        Silicone RTV Moldmaking and Casting Basics Sunday, 8/24/14 12:30 PM 2.0 Hours 4 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $60.00 plus $20.00 Materials Fee
        Non-member Sign Up $75.00 plus $20.00 Materials Fee
        Silicone RTV Moldmaking and Casting Basics Sunday, 9/14/14 11:00 AM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $20.00 Materials Fee
        Non-member Sign Up $75.00 plus $20.00 Materials Fee
        Silicone RTV Moldmaking and Casting Basics Sunday, 9/21/14 12:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $20.00 Materials Fee
        Non-member Sign Up $75.00 plus $20.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    FAB108: Injection Molding SBU

    The Morgan injection molding machine enables one to inexpensively fabricate from a few to many hundreds of identical parts molded from a large variety of thermoplastic materials.

    In this Safety and Basic Use (SBU) class, you will have the opportunity to fabricate several different plastic parts using molds that illustrate a variety of molding techniques. Once you have been completed this basic class, you will have the knowledge to safely operate the machine and set it up for your own mold and material.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    2 sessions currently scheduled:
        Injection Molding SBU Friday, 9/19/14 7:00 PM 3.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $90.00 plus $5.00 Materials Fee
        Non-member Sign Up $115.00 plus $5.00 Materials Fee
        Injection Molding SBU Sunday, 9/28/14 5:30 PM 3.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $5.00 Materials Fee
        Non-member Sign Up $115.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    FAB109: Plastic Bending and Welding Basics

    Learn how to use a strip welder to fuse pieces of ABS, styrene, polyethylene and nylon. Bend it, cement it and polish. Make it exactly the way you want!

    1 session currently scheduled:
        Plastic Bending and Welding Basics
    (FABRICATION: Plastic Welding Basics)
    Friday, 9/12/14 7:00 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $20.00 Materials Fee
        Non-member Sign Up $75.00 plus $20.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    FAB201: Carbon Fiber Basics

    In this class, you will learn the basics of carbon fiber layup, then combine raw carbon fiber cloth, a strengthener and 2-part, high-strength epoxy to make your very own carbon fiber key fob and take it home with you.

    This class focuses on the "compression molding" technique of carbon fiber fabrication, which you can easily use to make your own custom carbon fiber parts. You may also use a scroll saw to cut out a particular shape for your carbon fiber key fob. You'll be surprised how easy it is to do your own carbon fiber fabrication of all sorts of parts, and you'll want to use carbon fiber for many of your projects.

    1 session currently scheduled:
        Carbon Fiber Basics Thursday, 9/18/14 7:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     LASER CUTTING (LAS)
     
       
    LAS102: Laser Cutting and Etching SBU - Trotec

    Learn how to use a laser cutter to cut, etch, and engrave designs in a variety of materials up to 28" x 17" and up to 3/8" thick in this Safety and Basic Use (SBU) class. Work with acrylic, wood, paper, cardboard, fabric, leather, and even chocolate! Using graphics software like Adobe Illustrator or CorelDRAW, cut intricate designs and engrave highly detailed images at the touch of a button. The sky is the limit with this simple and versatile tool.

    Project: Etch a custom dog tag

    Prerequisite(s): None. However, familiarity with graphics software will be helpful

    Equipment access: Laser cutter

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the laser cutter outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are mandatory.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    8 sessions currently scheduled:
        Laser Cutting and Etching SBU - Trotec Monday, 8/25/14 6:00 PM 2.0 Hours 6 SEATS TOTAL
    CLASS FULL
        Laser Cutting and Etching SBU - Trotec Saturday, 8/30/14 3:30 PM 2.0 Hours 6 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting and Etching SBU - Trotec Friday, 9/5/14 4:30 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting and Etching SBU - Trotec Thursday, 9/11/14 6:00 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting and Etching SBU - Trotec Thursday, 9/18/14 6:30 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting and Etching SBU - Trotec Sunday, 9/21/14 4:00 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting and Etching SBU - Trotec Wednesday, 9/24/14 4:30 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting and Etching SBU - Trotec Monday, 9/29/14 5:30 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    LAS202: Laser Engraver Rotary Attachment SBU - Trotec

    Learn how to use the laser cutter’s rotary attachment in this Safety and Basic Use (SBU) class. The rotary attachment allows laser etching on cylindrical objects such as wine glasses, beer mugs, flashlights, bottles, and even drumsticks. Imagine the possibilities!

    Project: Etch a design into a drinking glass

    Prerequisite(s): LAS101 Laser Cutting and Etching SBU

    Equipment access: Laser engraver rotary attachment

    Minimum age: 12 years

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the laser engraver rotary attachment outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are mandatory.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    4 sessions currently scheduled:
        Laser Engraver Rotary Attachment SBU - Trotec Thursday, 9/4/14 7:00 PM 2.0 Hours 6 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Engraver Rotary Attachment SBU - Trotec Monday, 9/8/14 12:00 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Engraver Rotary Attachment SBU - Trotec Monday, 9/22/14 11:00 AM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Engraver Rotary Attachment SBU - Trotec Thursday, 9/25/14 3:00 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     MACHINING (MAC)
     
       
    MAC101: Milling Machine SBU

    In this Safety and Basic Use (SBU) class, learn basic operations of the vertical milling machine to safely select speeds, change end mills, use the digital readout, and secure work needed to accurately machine parts. Explore the theory of how to successfully choose the correct end mill and speed setting. Work precisely with metal and plastics to cut, drill and surface parts.

    Project: Aluminum business card holder

    Prerequisite(s): None. However, MTL103, Basic Metal Shop is recommended.

    Equipment access: Milling machine

    Minimum age: 16

    Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the mill outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

    • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove all jewelry.

    • Advisable: Hearing protection


    Materials fee: The materials fee includes materials for the class project, and an end mill for each student to keep. (Classes after 4/1/14)

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    7 sessions currently scheduled:
        Milling Machine SBU Saturday, 8/23/14 10:00 AM 3.0 Hours 5 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $125.00 plus $25.00 Materials Fee
        Milling Machine SBU Wednesday, 8/27/14 6:00 PM 3.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $125.00 plus $25.00 Materials Fee
        Milling Machine SBU Tuesday, 9/2/14 6:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $125.00 plus $25.00 Materials Fee
        Milling Machine SBU Tuesday, 9/9/14 7:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $125.00 plus $25.00 Materials Fee
        Milling Machine SBU Saturday, 9/20/14 10:00 AM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $125.00 plus $25.00 Materials Fee
        Milling Machine SBU Monday, 9/22/14 6:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $125.00 plus $25.00 Materials Fee
        Milling Machine SBU Tuesday, 9/30/14 6:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $125.00 plus $25.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MAC102: Metal Lathe SBU

    The lathe is used to create detailed cylindrical or tapered objects in plastic or metal. In this Safety and Basic Use course (SBU), learn the basic operations of metal turning on the lathe to safely select speeds, select and change cutting tools, use the digital readout, and secure work to make accurate cuts. Explore the theory of how to choose the correct cutter and speed setting.

    Project: Aluminum refrigerator magnet

    Prerequisite(s): None. However, knowledge of basic metal shop tools is recommended

    Equipment access: Metal lathe

    Minimum age: 16

    Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the metal lathe outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

    • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove all jewelry.

    • Advisable: Hearing protection


    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    3 sessions currently scheduled:
        Metal Lathe SBU Saturday, 9/6/14 10:00 AM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $5.00 Materials Fee
        Non-member Sign Up $115.00 plus $5.00 Materials Fee
        Metal Lathe SBU Monday, 9/15/14 6:30 PM 3.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $5.00 Materials Fee
        Non-member Sign Up $115.00 plus $5.00 Materials Fee
        Metal Lathe SBU Friday, 9/19/14 4:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $5.00 Materials Fee
        Non-member Sign Up $115.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MAC201: Advanced Milling Machine - Tramming and Precision

    In this advanced skills class, learn the art of tramming, how to make sure the mill and vise are exactly plumb and parallel, and how to precisely square up work. Confidently use a dial test indicator, 1-2-3 block, fly cutter, and deburring stone. Leave with the skill to mill flat and square projects to a very high degree of accuracy. With practice and patience, become a more accurate machinist and competent mill user!

    Project: Square an aluminum part

    Prerequisite(s):

    • Required: MAC101: Milling Machine SBU

    • Recommended: At least 10 hours of mill experience


    Minimum age: 16

    Supervision requirements: All 16- to 17-year-olds must attend class with a parent or guardian and be supervised, while using the mill, by a parent or guardian who has passed the SBU.

    Safety

    • Required: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove jewelry.

    • Recommended: Hearing protection


    2 sessions currently scheduled:
        Advanced Milling Machine - Tramming and Precision Saturday, 8/23/14 2:00 PM 2.0 Hours 4 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $70.00 plus $5.00 Materials Fee
        Non-member Sign Up $90.00 plus $5.00 Materials Fee
        Advanced Milling Machine - Tramming and Precision Saturday, 9/20/14 2:00 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $70.00 plus $5.00 Materials Fee
        Non-member Sign Up $90.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MAC202: Advanced Metal Lathe - Feeds, 4-Jaw Chuck and More Workholding

    In this class, you will learn how to safely perform several advanced operations on the metal lathe.

    You will learn to change out the chuck; center circular and square stock in the 4-jaw chuck; use a live center; turn between centers and mount stock between centers. You will also learn to use feed rates, a roughing pass and a finish pass to improve the overall look, feel and quality of your finished pieces.

    Your instructor will cover a wide variety of in-class projects that are designed to help you establish these skills.

    This is a great class for those looking to improve their overall level of comfort in the machine shop and metal lathe working skills.

    Prerequisite: You MUST have successfully completed the Metal Lathe SBU in order to take this class.

    1 session currently scheduled:
        Advanced Metal Lathe - Feeds, 4-Jaw Chuck and More Workholding Saturday, 9/6/14 2:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $70.00 plus $10.00 Materials Fee
        Non-member Sign Up $90.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MAC204: Advanced Metal Lathe - Tooling and Tool Grinding

    Lathe tooling has such a wide variety of shapes, materials, standards and sizes that sometimes choosing the proper tool can be overwhelming. Even more important is having an understanding of what makes a lathe tool work and why one may be more appropriate for the job at hand than another.

    In this class, you will learn the basics of lathe tooling selection and grind your own high speed steel lathe bit in TechShop's grinding room. We will also cover the basics of carbide tooling and explain when and why to choose carbon over steel.

    This class will help round out your metal lathe knowledge and equip you with a skill that can save you a good deal of headache and money down the road.

    1 session currently scheduled:
        Advanced Metal Lathe - Tooling and Tool Grinding Thursday, 9/11/14 6:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MAC205: Advanced Metal Lathe - Knurling and Threading

    Using a metal lathe to create custom threads for bolts, nuts or any custom application can seem like a daunting and quite complex machining operation.

    This class breaks down the process and clearly explains the concepts and techniques of threading. You will learn about the different types of tools used for threading, anatomy and nomenclature of threads and the step-by-step process to machining any kind of thread. We will also cover the process of knurling parts to create texture for gripping.

    This class is a great way to learn a fundamental lathe skill-set and increase your overall comfort with lathes and what can be created with them.



    You must have completed the Metal Lathe SBU to take this course.

    2 sessions currently scheduled:
        Advanced Metal Lathe - Knurling and Threading Thursday, 8/21/14 6:30 PM 2.0 Hours 5 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Advanced Metal Lathe - Knurling and Threading Thursday, 9/25/14 6:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     METAL SHOP (MTL)
     
       
    MTL301: Ironworker and Bender SBU

    In this Safety and Basic Use (SBU) class, learn to safely use the Edwards ironworker. Save time and effort with this highly versatile and powerful tool that shears steel plate (up to 5/8" thick), punches holes (up to 1-1/6" diameter in 5/8" thick steel), notches, and shears angle iron (up to 1/4" x 4" x 4") and round stock. Don’t get held back with drilling times and bit changes. This incredibly powerful machine cuts and punches holes in thick steel almost instantly!

    The bender is the perfect partner to the ironworker. Learn to safely bend round and square tube, from 1/2" to over 1-1/2". Bend tube to exact angles and stop wasting time cutting and welding corners!

    Project: No project; just practice making cuts, bending tube, and punching holes

    Prerequisite(s): None. However, MTL101 Basic Metal Shop SBU is highly recommended.

    Equipment access: Ironworker and bender

    Minimum age: 16

    Supervision requirements: None

    Safety


    • Mandatory: Closed-toed shoes, eye protection

    • Advisable: Hearing protection


    You will also learn how to use the Edwards 10 Ton Tube and Pipe Bender accessory with the selection of pipe dies provided by TechShop. Now you will be able to expand your project scope even further.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    4 sessions currently scheduled:
        Ironworker and Bender SBU Monday, 8/25/14 6:30 PM 2.5 Hours 5 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Ironworker and Bender SBU Wednesday, 9/3/14 7:00 PM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Ironworker and Bender SBU Saturday, 9/20/14 5:00 PM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Ironworker and Bender SBU Monday, 9/29/14 6:00 PM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MTL103: Basic Metal Shop SBU

    In this Safety and Basic Use (SBU) class, learn to use the cutting and shaping tools most commonly needed when working with metal. The tools work best on materials at least 1/8” thick, but some will work on thinner material as well. These tools are designed to work with steel and aluminum. Get hands-on experience using the vertical and horizontal band saw, cold saw, drill press, pedestal grinder, and disc sander.

    This class is the perfect companion to the mill, lathe and welding classes.

    Project: Metal bottle opener

    Prerequisite(s): None

    Equipment access: Vertical and horizontal band saw, cold saw, drill press, pedestal grinder, and disc sander

    Minimum age: 16

    Supervision requirement: None

    Safety
    • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Pull back hair, no jewelry,no gloves.

    • Advisable: Hearing protection


    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    9 sessions currently scheduled:
        Basic Metal Shop SBU Sunday, 8/24/14 3:00 PM 2.0 Hours 5 SEATS TOTAL
    1 SEAT LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Wednesday, 8/27/14 4:30 PM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Wednesday, 9/3/14 4:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Sunday, 9/7/14 12:00 PM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Saturday, 9/13/14 11:30 AM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Tuesday, 9/16/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Sunday, 9/21/14 3:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Friday, 9/26/14 6:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Sunday, 9/28/14 1:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MTL104: Sheet Metal Basics SBU

    Learn to safely use the tools most commonly needed to work with sheet metal. Get first-hand experience using the hydraulic shear, turret punch, slitting shear, corner notcher, finger brake (also called a box brake or pan brake) and spot welder in this Safety and Basic Use (SBU) class. Gain the knowledge to shear (cut), fold, bend, and punch holes in sheet metal.

    Project: Small sheet metal box

    Prerequisite(s): None

    Equipment access: Hydraulic shear, turret punch, slitting shear (hand shear) corner notcher, finger brake, and spot welder

    Note: These tools cannot be used to make curved surfaces or work with metal thicker than 16 gauge mild steel or aluminum.

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using these tools outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

    • Mandatory: Closed-toed shoes, eye protection

    • Advised: Hearing protection


    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    9 sessions currently scheduled:
        Sheet Metal Basics SBU Sunday, 8/24/14 6:00 PM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal Basics SBU Thursday, 8/28/14 3:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal Basics SBU Thursday, 9/4/14 3:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal Basics SBU Sunday, 9/7/14 3:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal Basics SBU Thursday, 9/11/14 2:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal Basics SBU Thursday, 9/18/14 6:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal Basics SBU Sunday, 9/21/14 6:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal Basics SBU Tuesday, 9/23/14 4:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal Basics SBU Sunday, 9/28/14 4:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MTL201: Sheet Metal - Organic Shapes SBU

    Learn to safely work with sheet metal to form curved shapes in this Safety and Basic Use (SBU) class. Receive hands-on practice with the slip roll, English wheel, planishing hammer, metal shrinker and stretcher, Beverly shear, shot bags, and hammers. Practice these basics techniques and create motorcycle gas tanks, fenders, curved panels, and more!

    Project: Turtle shell-shaped piece of aluminum with a beaded edge

    Prerequisite(s): MTL104 Sheet Metal Basics SBU is recommended

    Equipment access: Slip roll, English wheel, planishing hammer, metal shrinker and stretcher, Beverly shear, shot bags, and hammers. Note: These tools are not used to work with metal thicker than 16 gauge mild steel or aluminum.

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using these tools outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

    • Mandatory: Closed-toed shoes, eye protection

    • Advisable: Hearing protection


    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    4 sessions currently scheduled:
        Sheet Metal - Organic Shapes SBU Saturday, 8/23/14 10:30 AM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal - Organic Shapes SBU Sunday, 8/31/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal - Organic Shapes SBU Wednesday, 9/10/14 7:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal - Organic Shapes SBU Saturday, 9/27/14 10:30 AM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     RAPID PROTOTYPING (PRO)
     
       
    PRO102: MakerBot Replicator 3D Printer SBU

    Thanks to 3D printing, you can quickly and easily create a physical object from a computer model, literally printing the part as it goes. This is an easy way to prototype your parts before machining or injection molding.

    In this class, you will learn how to import, prepare and print your three-dimensional parts using the MakerBot Replicator 3D printer. By the end of the class, you will have all the information and knowledge necessary to use this machine for all your 3D printing needs.

    The class will print a small part that TechShop has designed.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    8 sessions currently scheduled:
        MakerBot Replicator 3D Printer SBU Tuesday, 8/26/14 4:00 PM 2.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        MakerBot Replicator 3D Printer SBU Sunday, 8/31/14 9:30 AM 2.0 Hours 10 SEATS TOTAL
    7 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        MakerBot Replicator 3D Printer SBU Tuesday, 9/2/14 4:00 PM 2.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        MakerBot Replicator 3D Printer SBU Thursday, 9/11/14 5:00 PM 2.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        MakerBot Replicator 3D Printer SBU Tuesday, 9/16/14 7:30 PM 2.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        MakerBot Replicator 3D Printer SBU Saturday, 9/20/14 9:30 AM 2.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        MakerBot Replicator 3D Printer SBU Wednesday, 9/24/14 8:00 PM 2.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        MakerBot Replicator 3D Printer SBU Sunday, 9/28/14 9:30 AM 2.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     SOCIAL EVENTS (SOC)
     
       
    SOC526: Member Orientation

    Welcome to TechShop!

    We're excited that you are thinking about or already have joined our vibrant community and want to take advantage of all the equipment and classes that TechShop has to offer.

    We would like to invite you to join us for our New Member Orientation, where we will talk about how the shop works and how you can get the most out of your membership here. Naturally, there will be snacks and time for any questions you might have.

    We look forward to seeing you there and around the shop!

    1 session currently scheduled:
        Member Orientation Wednesday, 9/17/14 6:30 PM 1.0 Hour 25 SEATS TOTAL
    22 SEATS LEFT
        Member and non-member Sign Up FREE, No Materials Fee
     TEXTILES (TXL)
     
       
    TXL101: Basic Sewing Machine SBU

    In this Safety and Basic Use (SBU) class, learn to use a sewing machine. Acquire skills to correctly thread machine, fill and place the bobbin, and change the foot. Also learn to sew straight, zig-zag, basting, and other specialty stitches. This machine sews through regular weight fabric but not heavy duty materials like leather or thick canvas. Go on to create messenger bags, rocket parachutes, clothing, plushies, sails, costumes, and more!

    Project: Pocket bag

    Prerequisites: None

    Equipment access: Sewing machine

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the sewing machine outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are required.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    4 sessions currently scheduled:
        Basic Sewing Machine SBU Saturday, 8/30/14 1:00 PM 1.5 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        Basic Sewing Machine SBU Friday, 9/5/14 6:00 PM 1.5 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        Basic Sewing Machine SBU Sunday, 9/14/14 2:00 PM 1.5 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        Basic Sewing Machine SBU Thursday, 9/25/14 6:00 PM 1.5 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    TXL103: CNC Embroiderer SBU

    In this Safety and Basic Use (SBU) class, learn to create custom embroidery designs with the intuitive and easy-to-use Janome embroidery machine. Take part in several demos and become familiar with hooping methods, needles, threading, several types of stabilizers, and more. See how to create digitized stitches based on monogramming and logo art as well as clipart-style designs. New to digitizing? Take TXL204: Digitizer CNC Embroiderer Software next!

    Project: Embroidered patch

    Prerequisites: None

    Equipment access: Embroidery machine

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the embroidery machine outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are required.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    1 session currently scheduled:
        CNC Embroiderer SBU Sunday, 8/31/14 2:00 PM 2.0 Hours 6 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    TXL105: Industrial Serger Sewing Machine SBU

    In this Safety and Basic Use (SBU) class, learn to use the Juki four-thread industrial serger sewing machine. Get hands-on serger experience using overlock stitching to create high quality, soft-feeling seams and fine rolled hems. Take advantage of this powerful machine to sew and hem heavy, layered materials like canvas and leather. Expect to increase productivity after learning this efficient machine.

    Project: Small pocket bag

    Prerequisites: None

    Equipment access: Industrial serger sewing machine

    Minimum age: 12

    Supervision requirements: All 12- to 15-year-olds must attend class with a parent or guardian and be supervised, while using the Industrial serger sewing machine, by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are required.



    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    1 session currently scheduled:
        Industrial Serger Sewing Machine SBU Wednesday, 9/17/14 4:30 PM 1.5 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    TXL107: CNC Long Arm Quilting Machine - SBU

    In this Safety and Basic Use (SBU) class, learn to quilt effortlessly with TechShop's CNC long arm quilting machine. Practice attaching fabric to the leads, winding bobbins, threading the machine, changing needles, and using the hopping foot. Stay in control with traditional quilting techniques or sit back and enjoy consistent stitch quality while the quilter automatically sews a pattern straight from the computer. Quilting has never been so easy!

    Project: Quilt a 20” x 15” square

    Prerequisites: Knowledge of quilting a plus

    Equipment access: CNC long arm quilting machine

    Minimum age: 12

    Supervision requirements: All 12- to 15-year-olds must attend class with a parent or guardian and be supervised, while using the long arm quilting machine, by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are required.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    2 sessions currently scheduled:
        CNC Long Arm Quilting Machine - SBU Saturday, 9/6/14 3:00 PM 4.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $130.00 plus $20.00 Materials Fee
        Non-member Sign Up $165.00 plus $20.00 Materials Fee
        CNC Long Arm Quilting Machine - SBU Sunday, 9/28/14 2:00 PM 4.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $130.00 plus $20.00 Materials Fee
        Non-member Sign Up $165.00 plus $20.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    TXL110: Industrial Sewing Machines - SBU

    In this Safety and Basic Use (SBU) class, learn to use the Juki straight (or single) stitch industrial sewing machine and the Juki industrial walking foot sewing machine. Practice methods of speed control and accuracy. Operate the presser foot with a knee lever and enjoy continuous bobbin winding. Then get to know the walking foot industrial sewing machine. This powerful machine is perfect for working with heavyweight materials such as leather, canvas, or multiple layers of fabric. Experience the walking foot advantage as it moves both the top and bottom of the fabric to keep the fabric from shifting. Start sewing like a pro!

    Project: Scissor pouch

    Prerequisites: None

    Equipment access: Industrial single stitch sewing machine and industrial walking foot sewing machine

    Minimum age: 12

    Supervision requirements: All 12- to 15-year-olds must attend class with a parent or guardian and be supervised, while using the industrial sewing machines, by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are required.



    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    3 sessions currently scheduled:
        Industrial Sewing Machines - SBU Sunday, 8/31/14 11:00 AM 2.0 Hours 5 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Industrial Sewing Machines - SBU Tuesday, 9/9/14 7:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Industrial Sewing Machines - SBU Wednesday, 9/24/14 7:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    TXL204: Digitizer CNC Embroiderer Software

    In this lecture-based class, learn the many aspects of this feature-rich, digitizing (creating machine embroidery stitches from 2D artwork) software package by Janome. (The software also supports Brother.) See how embroidery designs are created from existing artwork, objects (e.g., shapes, text, and clipart), and original artwork. This software-focused class does not include time on the CNC embroidery machine. Prepare to start having fun printing art in thread!

    Project: None

    Prerequisites: None. TXL103 CNC Embroidery Machine is recommended

    Equipment access: Digitizer embroidery software

    Minimum age: 12

    Supervision requirements: All 12- to 15-year-olds must attend class with a parent or guardian and be supervised, while using the computer, by a parent or guardian.

    Safety: Closed-toed shoes are required.



    2 sessions currently scheduled:
        Digitizer CNC Embroiderer Software Sunday, 9/7/14 5:30 PM 2.5 Hours 5 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        Digitizer CNC Embroiderer Software Tuesday, 9/30/14 7:00 PM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     WELDING / HOTSHOP (WLD)
     
       
    WLD101: TIG Welding SBU

    Welding is the process of fusing materials together. Learn how to use the basic TIG (tungsten inert gas) welding equipment in this Safety and Basic Use (SBU) class. Get started creating quality weld beads on mild steel. While this class practices on thin steel, the TIG welder is capable of welding material up to 1/2” thick.

    With extensive practice, TIG welding can be used with a wide variety of different metals, producing a very pure, precise, and attractive weld.

    Project: No project; just guided practice with an instructor.

    Prerequisite(s): None. However, successful completion of MTL103: Basic Metal Shop will provide access to the cutting and grinding tools needed for working with metal.

    Equipment access: TIG welder

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the welder outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety
    • Mandatory: Closed-toed shoes made of natural fibers or leather, natural fiber or leather long sleeved shirt, natural fiber or leather long pants. Welding hood, gloves and jacket provided by TechShop.

    • Advised: Leather welding jacket, leather welding pants, leather boots, respirator and hearing protection.



    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    8 sessions currently scheduled:
        TIG Welding SBU Thursday, 8/21/14 7:00 PM 2.0 Hours 4 SEATS TOTAL
    CLASS FULL
        TIG Welding SBU Tuesday, 8/26/14 6:30 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        TIG Welding SBU Tuesday, 9/2/14 6:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        TIG Welding SBU Monday, 9/8/14 6:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        TIG Welding SBU Wednesday, 9/17/14 6:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        TIG Welding SBU Saturday, 9/20/14 2:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        TIG Welding SBU Wednesday, 9/24/14 7:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        TIG Welding SBU Tuesday, 9/30/14 6:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WLD102: MIG Welding SBU

    Welding is the process of fusing materials together. In this Safety and Basic Use (SBU) class, learn to use a basic metal inert gas (MIG) welder with solid wire and shielding gas to create quality weld beads on steel up to 1/2" thick. This semi-automatic method of welding (continuous consumable wire feed), also called GMAW (gas metal arc welding) and wire feed welding, offers versatility, speed, and quality. About as easy as welding gets, this is a great place for the beginner to start.

    Project: Guided practice with an instructor

    Prerequisites: None. However, MTL103: Basic Metal Shop is recommended.

    Equipment access: MIG welder

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the welder outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety
    • Mandatory: Closed-toed shoes made of natural fibers or leather, natural fiber or leather long sleeved shirt, natural fiber or leather long pants. Welding hood, gloves and jacket provided by TechShop.

    • Advised: Leather welding jacket, leather welding pants, leather boots, respirator and hearing protection.



    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    9 sessions currently scheduled:
        MIG Welding SBU Thursday, 8/28/14 6:00 PM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Sunday, 8/31/14 2:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Thursday, 9/4/14 6:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Sunday, 9/7/14 6:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Thursday, 9/11/14 5:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Tuesday, 9/16/14 2:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Sunday, 9/21/14 12:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Tuesday, 9/23/14 7:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Sunday, 9/28/14 10:30 AM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WLD201: TIG Welding 2 - Aluminum

    After completing the TIG Safety and Basic Use (SBU) class, you can try your skills in a different material. Aluminum has characteristics that require specific equipment setup, metal preparation and torch operation.

    In this class, you will practice specific joints and improve weld bead quality under the guidance of an instructor. Lap, butt, corner and fillet welds will all be discussed and individual students will perform at their own rates. Emphasis will be placed on visual inspection of welds and heat zone theory, so that you gain a better understanding of what a quality weld joint really looks like.

    For your safety, you must wear long pants and a long-sleeved shirt in natural fibers in the Hot Shop, and remember to always wear closed-toed shoes at TechShop.

    Prerequisite: Successful completion of the TIG Welding SBU.

    2 sessions currently scheduled:
        TIG Welding 2 - Aluminum Sunday, 8/31/14 11:00 AM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $80.00 plus $10.00 Materials Fee
        Non-member Sign Up $100.00 plus $10.00 Materials Fee
        TIG Welding 2 - Aluminum Tuesday, 9/9/14 6:30 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $80.00 plus $10.00 Materials Fee
        Non-member Sign Up $100.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WLD301: Advanced Welding Lab

    The MIG and TIG welding lab is a place to practice techniques, develop skills, and get help. Come to class with a goal in mind and project in hand. This student-driven class does not rely on a handout or traditional instruction; instead the class is driven by student questions and needs.

    Examples: Weld very thin steel, make clean welds on tubing, receive feedback on skills, get advice on fixturing a difficult workpiece.

    Students must have taken and passed the appropriate welding Safety and Basic Use (SBU) class; if you're going to get help with TIG welding, for example, you must have passed the TIG SBU. This is not an SBU and will not count towards machine access.

    Project: None. Students will have access to welding coupons and filler rod but must bring any other materials needed for their project.

    Prerequisites
    • Required: Must have passed the appropriate MIG or TIG welding SBU for the equipment you will be working on

    • Recommended: 12 hours experience TIG welding, 6 hours experience MIG welding


    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the welder outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety
    • Mandatory: Welding helmet, closed-toed shoes made of natural fibers or leather, natural fiber or leather long sleeved shirt,natural fiber or leather long pants. Welding hood, gloves and jacket supplied by TechShop.

    • Advisable: Leather welding jacket, leather welding pants, leather boots, respirator


    2 sessions currently scheduled:
        Advanced Welding Lab Saturday, 8/23/14 1:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Advanced Welding Lab Saturday, 9/20/14 11:00 AM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     WOODSHOP (WOD)
     
       
    WOD101: Wood Shop SBU

    Learn the fundamentals of woodworking and how to safely operate the core woodshop tools in this Safety and Basic Use (SBU) class. Get practical, hands-on experience using a SawStop table saw, sliding compound miter saw, drill press, band saw, and belt and disk sanders. Learn to make straight cuts (rip and crosscut), mitered cuts, curved cuts, smooth edges, and drill holes.

    Project: Build a small wooden shelf

    Prerequisites: None

    Equipment access: Sliding compound miter saw, table saw, wood drill press, wood band saw, and belt and disc sanders

    Minimum age: 16

    Supervision requirements: None

    Safety

    • Mandatory: Closed-toed shoes, eye protection, short sleeves

    • Advised: Hearing protection, particle filter or dust mask


    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    9 sessions currently scheduled:
        Wood Shop SBU Saturday, 8/23/14 4:30 PM 2.5 Hours 5 SEATS TOTAL
    CLASS FULL
        Wood Shop SBU Thursday, 8/28/14 5:00 PM 2.5 Hours 5 SEATS TOTAL
    1 SEAT LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Wood Shop SBU Sunday, 8/31/14 1:00 PM 2.5 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Wood Shop SBU Thursday, 9/4/14 5:00 PM 2.5 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Wood Shop SBU Sunday, 9/7/14 1:00 PM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Wood Shop SBU Saturday, 9/13/14 4:00 PM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Wood Shop SBU Monday, 9/15/14 5:00 PM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Wood Shop SBU Thursday, 9/25/14 4:00 PM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Wood Shop SBU Saturday, 9/27/14 11:30 AM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WOD103: Wood Lathe SBU

    Woodturning is a method of woodworking used to create wooden bowls, pens, table legs and endless other round or cylindrical items on a lathe. Learn to safely use the lathe to make wooden parts in this Safety and Basic Use (SBU) class. Discover how to set up the lathe, prepare raw materials, and use different wood turning tools. Spin circles around the shop with the new skills acquired in this class!

    Project: Turn a wooden spindle

    Prerequisites: WOD101: Woodshop - SBU recommended but not required

    Equipment access: Wood lathe

    Minimum age: 16

    Supervision requirements: None

    Safety

    • Mandatory: Closed-toed shoes, eye protection, short sleeves, face shield

    • Advisable: Hearing protection, particle filter, or dust mask


    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    4 sessions currently scheduled:
        Wood Lathe SBU Saturday, 8/23/14 2:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Wood Lathe SBU Wednesday, 9/3/14 7:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Wood Lathe SBU Thursday, 9/18/14 7:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Wood Lathe SBU Sunday, 9/21/14 10:00 AM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WOD104: Metal Spinning on the Wood Lathe

    Learn to safely spin metal on the wood lathe, and then use your woodturning techniques to manufacture hard maple tooling to use to spin pewter, aluminum, copper, brass or silver into beautiful and functional products.

    In this Safety and Basic Use (SBU) class, you will learn how to set up the lathe, prepare the raw materials and use the different metal spinning tools. You will also learn how to safely use the lathe to spin metal using wooden tooling.

    The project is a small aluminum bowl.

    1 session currently scheduled:
        Metal Spinning on the Wood Lathe Friday, 8/22/14 6:30 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WOD201: Jointer, Planer and Table Router SBU

    In this Safety and Basic Use (SBU) class, learn proper techniques and how to safely operate the jointer, planer, and table-mounted router. Use these woodworking tools to turn rough lumber into finished boards (achieve precise thickness, square edges and flat surfaces) as well as create complex profiles for edge finishing and joinery operations. Say goodbye to the constraints of lumberyard wood and the high price of mail order wood. Say hello to affordable custom woodworking projects!

    Project:Perform various operations on a piece of wood

    Prerequisites: WOD 101: Basic Woodshop SBU

    Equipment access: Table-mounted router, jointer, planer

    Minimum age: 16

    Supervision requirements: None

    Safety

    • Mandatory: Closed-toed shoes, eye protection, short sleeves

    • Advisable: Hearing protection, particle filter or dust mask, face shield




    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    9 sessions currently scheduled:
        Jointer, Planer and Table Router SBU Friday, 8/22/14 3:00 PM 2.0 Hours 4 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Tuesday, 8/26/14 2:00 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Sunday, 8/31/14 10:00 AM 2.0 Hours 4 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Tuesday, 9/2/14 2:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Saturday, 9/13/14 1:00 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Tuesday, 9/16/14 6:30 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Monday, 9/22/14 5:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Saturday, 9/27/14 3:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Tuesday, 9/30/14 2:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     WORKSHOPS (WKS)
     
       
    WKS525: Read-a-Sewing-Pattern Workshop

    Ever wanted to make your own garment, but it seemed like you'd have to learn a new language? Come, take a vocabulary lesson with us -- and feel free to bring a pattern you have questions about.

    This class is an introduction for people who would like more information or are new to using patterns. It is easy to be overwhelmed and this class will help you locate the key information. It will also explain how to follow the directions to assemble a completed project.

    Please bring in a pattern you would like use as a reference or one that you have questions about.

    1 session currently scheduled:
        Read-a-Sewing-Pattern Workshop Wednesday, 9/3/14 7:30 PM 1.0 Hour 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $30.00, No Materials Fee
        Non-member Sign Up $40.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS537: Heat Press and Vinyl Cutter SBU

    Are you ready to start making your own professional quality heat pressed shirts at TechShop?

    In this hands-on class, you'll learn all the basics of using our vinyl cutter and heat press to add your own graphic designs to shirts, blankets, flags, bags, and more! Your instructor will guide you through the process, including how to create and cut out your own design using our CNC vinyl cutter, preparing a heat press vinyl, and transferring and setting it onto your shirt.

    If you'd like to print a T-shirt or bag using your own artwork (approximately 6"x6"), please bring a vectorized design saved as an .eps file. You're welcome to bring more than one design so the instructor can help you choose which one to use. Only one vinyl cutout will be created during class. Simple is best! Otherwise the instructor will have some designs already prepared for you to choose from.

    You do not need to take Concepts of CNC prior to taking this class. You do need to understand how vector-based graphics work, and you should be familiar with Adobe Illustrator or CorelDRAW. If you are not familiar with either of these programs, we offer classes in both, in the "Computer (COM)" section.

    Once you have taken and successfully passed this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    3 sessions currently scheduled:
        Heat Press and Vinyl Cutter SBU
    (Heat Press and Vinyl Cutter SBU)
    Saturday, 8/23/14 1:00 PM 3.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $70.00 plus $10.00 Materials Fee
        Non-member Sign Up $90.00 plus $10.00 Materials Fee
        Heat Press and Vinyl Cutter SBU
    (Heat Press and Vinyl Cutter SBU)
    Saturday, 9/6/14 11:00 AM 3.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $70.00 plus $10.00 Materials Fee
        Non-member Sign Up $90.00 plus $10.00 Materials Fee
        Heat Press and Vinyl Cutter SBU
    (Heat Press and Vinyl Cutter SBU)
    Monday, 9/15/14 5:30 PM 3.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $70.00 plus $10.00 Materials Fee
        Non-member Sign Up $90.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS707: Jewelry and Metalsmithing Basics - Sawing and Riveting

    Welcome to the wonderful world of jewelry and metalsmithing.

    This course is designed as an introduction to common metalsmithing techniques and tools such as cold connections and jewelry saws.

    Through hands-on experience, participants will learn sawing, riveting, drilling, filing, and sanding, and practice these techniques under instructor supervision. Participants will also learn about the various properties of non-ferrous metals.

    This course is the pre-requisite for the Belt Buckle Workshop. You must take the jewelry blades you received in this course to use in the Belt Buckle Workshop.

    1 session currently scheduled:
        Jewelry and Metalsmithing Basics - Sawing and Riveting Monday, 9/8/14 3:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $40.00 Materials Fee
        Non-member Sign Up $75.00 plus $40.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS727: Leatherworking Basics - Creating a Leather Key Fob

    In this workshop, you’ll learn fundamental skills for working with leather, and walk away with a keychain fob that you made yourself!

    We’ll cover everything from pattern tracing and leather cutting, to embossing designs using traditional tools. There will be 8 designs to choose from, all of which will give you practice using a wide range of leather tooling techniques. While yes, in this workshop we’ll be making something cool, a lot of emphasis will be put on practicing technique with some of the more specialized leather crafting tools. Swivel knife and stamping tools in particular are the focus of tools that you’ll be practicing with.

    At the end of this workshop, you’ll have experience with pattern transferring, swivel knife work, how to properly case leather for tooling, tooling (stamping) designs, edge finishing and dressing, hardware setting and care of tools. Please bring a USB key if you’d like an .svg file of all the patterns offered in the class, and the swivel knife practice worksheets.

    Prerequisites: None, but you should be comfortable with the laser cutters and the wood shop tools.

    2 sessions currently scheduled:
        Leatherworking Basics - Creating a Leather Key Fob Saturday, 9/6/14 1:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Leatherworking Basics - Creating a Leather Key Fob Sunday, 9/14/14 1:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS729: Jewelry and Metalsmithing - Custom Metal Belt Buckle

    Every true Texan needs a custom belt buckle.

    In this workshop, you will learn to create a custom belt buckle using cold connections with copper, aluminum and brass. Embellishments will be added by using jewelry techniques such as stamping, forming, sawing and riveting.

    Prerequisite: You must have successfully passed the Jewelry and Metalsmithing Basics - Sawing and Riveting class before taking this one. Don’t forget to bring your saw blades.



    2 sessions currently scheduled:
        Jewelry and Metalsmithing - Custom Metal Belt Buckle Monday, 8/25/14 2:00 PM 3.0 Hours 5 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $90.00 plus $35.00 Materials Fee
        Non-member Sign Up $115.00 plus $35.00 Materials Fee
        Jewelry and Metalsmithing - Custom Metal Belt Buckle Monday, 9/22/14 2:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $35.00 Materials Fee
        Non-member Sign Up $115.00 plus $35.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS730: Adjust-a-Sewing-Pattern Workshop

    In this workshop you will learn when and how to adjust a store bought pattern.

    We will cover how to adjust a pattern to fit better and/or combine patterns together to create the look you really want.

    The 1st hour will introduce you to different techniques involved in adjusting a pattern.

    The 2nd hour is for practical application by using a pattern that you bring with you ready to ask questions and work on.

    1 session currently scheduled:
        Adjust-a-Sewing-Pattern Workshop Wednesday, 9/17/14 7:00 PM 2.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS736: Basic Veneering

    Learn the basics of wood veneering with a hands on project of creating a 4 way book matched burl veneer panel.

    Topics covered include:

    Why use veneer?

    Types of veneer.

    Planning your veneer project and buying your veneer.

    Preparation of and working with veneers.

    Gluing and Post gluing operations.

    Students will create an approximate 20" square panel veneered with 4 way book matched burl that can subsequently be used for a table top or door panel.

    Class will be three separate sessions on three consecutive days.

    First session, Thursday at 7:00pm, is two hours covering a lecture on veneers and using veneers, followed by a hands on flattening veneer using a vacuum bag.

    Second session, Friday at 7:00pm, is three hours long consisting of layout, cutting, taping and gluing. Parts will be clamped using a vacuum bag.

    Third session, Saturday at 9:30am, is an hour long of post gluing operations and clean up.

    1 session currently scheduled:
        Basic Veneering Thursday, 8/21/14 7:00 PM 6.0 Hours 6 SEATS TOTAL
    CLASS FULL
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS738: Leatherworking Basics - Make a leather belt

    In this workshop, participants will make a custom dyed leather belt. Participants will learn the process from start to finish- measuring for the perfect size, laying out the holes, folding in a swappable belt buckle, edge finishing, dyeing and sealing the leather. Handouts will cover all the instructions, and will have templates for hole placement, and different billet-end shapes.

    Supplies for this class are provided by the instructor, but if you’ve taken the ‘Make a Custom Belt Buckle’ class, you can use that buckle.



    1 session currently scheduled:
        Leatherworking Basics - Make a leather belt Wednesday, 9/24/14 6:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $45.00 plus $25.00 Materials Fee
        Non-member Sign Up $55.00 plus $25.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS741: LabVIEW Experiments

    Learn how to use LabVIEW graphical programming to create Virtual Instruments that measure, analyze, control, and log data from real world signals and sensors.

    In this class you will learn how to use LabVIEW, a graphical programming language, to automate the measurements covered in the introduction to National Instruments myDAQ Measurements class, enabling you to create systems that interact with the real world based on measurements from the various sensors. You will learn how to implement the logic for a simple thermostat control system in LabVIEW using the input and output capabilities of the NI myDAQ.

    You will learn how to:

    -create user interfaces with controls and indicators

    -use graphical programming structures

    -interface digital and analog input and output signals from a myDAQ

    -build a custom thermostat through a series of experiments

    1 session currently scheduled:
        LabVIEW Experiments Saturday, 8/30/14 10:30 AM 3.0 Hours 6 SEATS TOTAL
    1 SEAT LEFT
        * Member Sign Up $80.00, No Materials Fee
        Non-member Sign Up $90.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS744: Date Night! Laser Etched Wine Glasses

    Make it a date at TechShop!

    Etch into glass using TechShop's laser cutting machine! Using the rotary attachment tool for the laser cutter, you can etch designs into cylindrical items. Choose from one of our designs or learn how to design a simple one on your own. You will also get to create your very own acrylic wine charm. Choose from several different designs.

    This is a unique activity perfect for a DIY date night!

    Wine tasting included! (21 and up)

    This workshop is open to both members and non-members of TechShop.

    Note: This is not a Safety and Basic Usage class. If you want to make more customized items, check out our Laser Rotary Attachment SBU class, offered regularly.

    Only one person per couple needs to register.



    1 session currently scheduled:
        Date Night! Laser Etched Wine Glasses
    (Date Night! Laser Etched Wine Glasses)
    Friday, 8/29/14 7:00 PM 1.5 Hours 3 SEATS TOTAL
    1 SEAT LEFT
        Member and non-member Sign Up $60.00, No Materials Fee
       
    WKS701: Arduino - Experiments

    You’ve got an Arduino. You know how to program it. Now what?!

    In this workshop, you’ll learn how to make your Arduino actually DO things. We’ll set up the Arduino IDE, go over some simple programming and then start experimenting!

    We’ll cover how to work with information from external hardware devices including analog and digital input sources as you wire and program projects that explore how to interpret and utilize the signals that the inputs supply the Arduino. We will also cover how to control external hardware devices via digital and PWM outputs as you wire and program projects that teach the main principles of controlling hardware with information output from the Arduino. You will also learn both the hardware and software aspects of working with an LCD screen by attaching a display, feeding it information and making the display respond.

    Prerequisites: Students need to have a good understanding of Arduino programming, which you can learn from the TechShop Arduino Programming class. You also need to bring a functioning Bare Bones Board & BUB, or an Arduino UNO along with the proper USB cable. The class is taught in the computer lab and PCs will be available for all students to use.

    Your lab fee will pay for a display, tri-color LED, servo, breadboard, wire kit, storage box and various small parts required for the class. They are yours to keep after class.

    2 sessions currently scheduled:
        Arduino - Experiments Monday, 8/25/14 6:00 PM 3.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $90.00 plus $40.00 Materials Fee
        Non-member Sign Up $115.00 plus $40.00 Materials Fee
        Arduino - Experiments Tuesday, 9/23/14 6:00 PM 3.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $90.00 plus $40.00 Materials Fee
        Non-member Sign Up $115.00 plus $40.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.